MOTUS Stand-Alone

Turn your buoy into an intelligent data collecting platform with the Aanderaa MOTUS Stand-Alone Sensor.

There are numerous ways of measuring Ocean Waves. At Aanderaa we have focused on three different types of measurement.

One option is the MOTUS Directional Wave Sensor suitable for integration on different buoy types. It is intended for commercial as well as research use. The sensor processes wave data and is configurable to present parameters and wave spectrum directly.

The sensor can be connected to a SmartGuard using the CANbus based AiCaP protocol. It can also be connected to a PC or third party systems through the RS-232 interface.

3 features makes the MOTUS Stand-Alone Sensor particularly suitable for integration to different buoys and loggers:

  • For larger buoys, the response to short wavelengths may be suppressed. This can to some extent be compensated for by activating and tuning the build in transfer function.
  • The sensor can be placed in non-ideal location on the buoy. The off-center compensation can be enabled to remove the errors that in some cases may be significant.
  • Buoys may have magnetic parts affecting wave sensors and other sensors requiring a magnetometer or compass. The MOTUS can receive an external compass directly and utilize this to ensure correct wave direction data.

Need Pricing?  Fill out our Request a Quote form to speed along your request. 

Have a question?  Ask a question to send your inquiry directly to our support team.

Contact us directly or find your nearest authorized representative.



Worldwide Representatives for Aanderaa

Related Products

MOTUS Buoy

The MOTUS (movement in Latin) Wave Buoy is a perfect solution for collecting environmental data in coastal areas.

Ocean Currents

Ocean water currents are driven by winds, tides and density differences. The ocean circulation regulates the earth's climate by transporting heat. The flowing water affects offshore and coastal construction and also carries particles, animals, plants, nutrients, pollutants and dissolved gases.

Pressure Based Waves

Measure Waves with the Aanderaa Wave and Tide Sensor - a compact fully integrated sensor for measuring wave and tide conditions

Motion Based Waves

Accurate wave measurements are critical in applications such as offshore wind farm development, navigation, cable laying, breakwater building, and bridge construction.

Acoustic Wave

The acoustic based SeaGuardII DCP Wave, the swiss army knife of ADCP`s with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument.