The Mipeg X is a crane monitoring system which is monitoring and logging the crane load cycles. The system is an event recorder which mean that no recording is done when the crane is idle.
The Mipeg X is a crane monitoring system which is monitoring and logging/recording the crane load cycles. The system is an event recorder which mean that no recording is done when the crane is idle. The recorded will start when the crane starts to lift a load. This is the “event” starting the cycle. During the cycle, many different operational parameters are recorded and stored in the Crane Operation Recorder – the COR. These records may be retrieved at any time by following a well-documented procedure, data downloaded onto a Secure Digital (SD) card. The SD card is installed in the Operator`s display.
These crane usage data is very important and is a critical input to enter into a planned, preventing maintenance program to provide correct crane service interval and to secure the crane safety.
The event recorder can store approx. 5000 records. The system may also be organized as a ring buffer – a FIFO – where the oldest records will be lost/over written when the ring buffer is full. A full data coverage may still be achieved if operation retrieve and erase the COR before this is full. The Cor% full is displayed.