Operator's Display

The Mipeg X system uses a graphical color, touch screen display. The unit is programmed and operates as a highly flexible and expandable unit.

The unit is a 5-displays-in-1, as the operator can configure it to show:

  1. The Safe Load Indicator (SLI) features also referred to as Rated Capacity Indicator (RCI) or Load Moment Indicator (LML) showing Hook Load, operating Radius, Safe Working Load (SWL), Lift/Sea Condition, Crane rigging etc.
  2. Safe Reach Indicator, showing how far you may safely boom down to see if the set down area is within your boom reach
  3. Slew Operation Limit Monitor, mapping the critical deck area and showing available deck space
  4. Hook Position, giving the visual position of the hook and critical limits
  5. Wind Speed and Direction, showing the wind speed and direction relative to the boom

Details of the various display features and parts are described elsewhere on this web page.

The standard display is:

       -          15" full graphic, color touch screen display (415x290x110 mm - 16x11x4")

       -          Programmed for portrait viewing

       -          Pan and tilt adjustments through the VESA 200x200 bracket

       -          Extreme brightness: 1000 cd/m2 reducing glare and reflection

       -          Touch screen using analog resistive technology, reducing "false operations". This technology
                  will allow the operator to use gloves

       -          Operating temperature, -20 to +50 oC ( -4 to + 122 oF)

       -          3rd party approved: ingress protection IP66 (NEMA 4X), IECEx and Atex zone 2 certified

Data & Specification Sheets

Mipeg X

Brochures

Mipeg X brochure

Mipeg X flyer

Presentations

Mipeg user reference list

Need Pricing or have a question?  

Contact us directly or find your nearest authorized representative.



Worldwide Representatives for Mipeg

Related Products

Wind Speed and Direction System

With Mipeg X you can integrate 3rd parties analogue sensors. By adding interface logic and software, new features can be incorporated.

Load Hoist and Moment Sensors

State of the art strain sensor utilizing a unique, frequency based method.

Slew Operation Limiter - OLM

The Mipeg X system can easily include the Slew Operation Limiter by adding software and the actual sensor.

Automatic Overload Protection System - AOPS

Our AOPS system solution is built to comply with the EN 13852-1. Any AOPS has to be designed in close cooperation with the Crane OEM or other person with similar knowledge to make sure that the combined solution meet the requirement.

Mipeg Crane Monitoring System

Lifting operations at sea is to be regarded as a critical and in some cases difficult and dangerous. An offshore crane is the “life line” between the offshore installation/vessel and the supply chain onshore.

Boom Angle Sensor

The boom angle is measured and calculated/converted to show the operating radius to the crane driver.